JW4106S uses innovative design and exquisite manufacturing technology to bring the unprecedented fusion experience to the user, the brand-new technical greatly shortened the fusion and the heat shrinkage time, the application of brand-new high definition optical fiber microscope, all
imported high-speed Motor, a large number
of aluminum-magnesium alloy materials,
small volume, light weight, low loss, high speed, high reliability, etc.
Careful core alignment, ultra low fiber splicing loss
2.320X image magnification, 5 mm ultra short fiber splice
3.7 seconds of rapid fusion, 18 seconds of high-efficiency heating
4.300 sets fusion mode&100 sets heating mode High-definition Liquid Crystal Display, high-strength protective panels, and observation of X-and y-directional fibers three-in-one clamp, fusible single core, leather wire, tail fiber Small Size, light weight USB & SD card interface, U Disk Automatic Software Upgrade built-in modular lithium battery, welding and heating cycle at least 200 times
Model | JW4106S |
dimension | W*H*D: 120*130*154mm (No rubber shockproof pad) |
weight | device1.59KG (device),0. 38KG (battery) |
Alignment type | Accurate core alignment, accurate cladding alignment |
Fiber type | Conform ITU-TG.651/652/653/655/ 657Specified common fiber, leather and jumper cables |
Fiber diameter | cladding: 80~150um, coating: 0. 1~ 3mm |
cutting length | 5~16mm (Covered fiber diameter<≤250um) ; |
10mm (Covered fiber diameter0.25~ 3mm) | |
Typical weld loss | 0.02dB (SMF) ;0.01dB (MMF) ; 0. 04dB (DSF) ;0.04dB (NZDSF) |
RL | >60dB |
illumination | Built-in high brightness, wide range of lighting |
weld time | 7 sec |
heat-up time | Typical heating time: 18 sec |
welding record | 10000 group、64 group Image storage |
tension test | 1. 96~ 2.25N |
heat-shrinkable Tube | 60mm、40mm &Series heat shrinkable tube |
work environment | altitude: 0~6000M, relative humidity0~95%RH, -10~50C |
image display | High-performance 4.3-inch LCD touch screen |
magnification times | 320times/ 88 times |
power input | AC Power100~ 240V, 60Hz,0~1. 5A; DC power10~ ~15V |
Battery life | Cycle charge up to 300~500 times, the customer can replace |
battery capacity | 11. 1V, 6400mAh, Welding and heating cycles are typically 220 times |
Battery life | Typical value 4000 times, customer can replace by themselves. |
operation interface | GUI Graphical user interface |
external interface | USB/SD |