optical fiber quick connector
Insert type plastic 1 point 64 optical splitter box, basic requirements wall-mounted plastic 1 point 64 optical splitter box, box material outdoor plastic 1 point 64 optical splitter box, production unit plastic 1 point 64 optical splitter box box, supplier 1 point 64 plastic optical splitter box 1 point 64 plastic optical splitter box plug-in 64 core splitter box fiber optic fiber splitter box plastic 1 point 64 optical splitter box pole type, Shanghai Huijue Network Communication Equipment Co., Ltd. , we are co-construction and sharing of optical cable transfer boxes, co-construction and sharing of optical fiber distribution frames, optical cable splice boxes, optical cable terminal boxes, three-in-one corridor boxes, optical cable splitting boxes , 1 minute 64 optical splitter box holding pole type plastic 1 minute 64 optical splitter box holding pole type plastic 1 minute 64 optical splitter box holding pole type 1, the box is fully enclosed structure, beautiful appearance. 2. The box body is made of plastic material, which has excellent moisture-proof, waterproof, dust-proof, corrosion-resistant and anti-aging performance, and the protection level reaches IP54. 4. Using the chip optical splitter, the configuration of Hongmai Technology is more flexible and free. 5. The incoming and outgoing lines of optical cables, pigtails and jumpers are independent of each other and do not interfere with each other. 6. The plug-in optical splitter can be flipped for operation, which is convenient and quick for construction and maintenance. 7. The installation method of the box can be wall-mounted or pole-mounted.
Product features: plastic 1 point 64 optical splitter box insert type 64 core optical fiber cable split box outdoor waterproof fiber optic split box
- Fully modular design, fully frontal operation
- Integrate welding and wiring to maximize high density
- Can be installed on a 19-inch standard rack
- Suitable for ribbon and non-ribbon cables
- Various adapters such as FC, SC, ST and LC can be installed by snap-fitting
- The adapter and the device are installed at a 30° clip, which not only ensures the bending curvature radius of the jumper, but also avoids laser burns to human eyes
- Easy to operate and perfect protection
- Both optical cables and pigtails have a storage space of more than 2m
Performance:
- Ambient temperature: -40℃～+60℃
- Atmospheric pressure: 70Kpa～106Kpa
- Relative humidity: ≤95% (+40℃)
- Optical fiber connector insertion loss: ≤0.3dB
- Optical fiber connector return loss PC type: ≥40dB; UPC type: ≥50dB; APC type: ≥60dB
- The durability life of fiber optic connector plugging and unplugging is more than 1000 times
FTTH fiber-to-the-home series: optical fiber quick connector, cold connector, PLC optical splitter box, optical fiber desktop box, optical fiber panel, leather cable, optical fiber corridor box, optical cable distribution box, optical cable stripper, etc.
ODF optical fiber distribution series: optical fiber distribution frame, optical cable transfer box, ODF box, optical fiber distribution box, integrated tray, bundle. Ribbon pigtail, optical fiber jumper, splicing tray, optical fiber adapter, etc.
Box accessories series: flange clips, twelve clips, fiber storage drum, three-leaf winding ring, four-leaf winding ring, winding disk, cable management ring, optical cable fixing column, optical cable fixing seat, etc.
The fiber splitting (optical splitting) box designed to meet the market demand is divided into direct fusion type, adapter type optical fiber splitting box and box type, insert type optical fiber splitting box. The box material is made of high-quality cold-rolled steel, stainless steel or composite materials. Mainly suitable for corridors or outdoor light splitting points in FTTH access mode
It is suitable for primary or secondary spectroscopy of FTTH, and the advantages of secondary spectroscopy are particularly obvious. And introduced the bypass fiber connection function.
The direct melting type is small in size and various in configuration. It is especially suitable for placing in corridors, weak current wells and other occasions in the first-level splitting mode.
In addition to the distribution line function, the adapter-type fiber distribution box also reserves the optical splitting function, which can flexibly configure various box-type optical splitters of different specifications.
Uplink fiber optic cable: capacity 16-32 fiber optic cable outlet: butterfly fiber optic cable connected to SC butterfly fiber optic cable pigtail or quick connector to the user end. Cable entry method: room
Inner up/down, outdoor down.
Fiber splitting (light splitting) box: suitable for direct installation of plug-in adapters.
The plug-in optical splitter box adopts a modular design and has two to four (eight) expansion slots, and the optical splitter can be inserted into the slot. pass
Flexibly increase the number of optical splitting pieces to achieve port expansion, and optical splitting modules of different capacities are versatile and interchangeable. Another configuration for splice tray
Connecting to the uplink optical cable. The storage of pigtails is fixed with adapters, realizing no jumper connection. The box material is made of high-quality cold-rolled steel or stainless steel.
The product is mainly suitable for the corridor splitting point under FTTH access mode. It is suitable for primary or secondary spectroscopy of FTTH, and the advantages of secondary spectroscopy are particularly obvious.
Ø The flexible configuration of optical add and insert chips can save the initial investment for operators to the greatest extent.
Ø The optical splitter piece integrates the optical splitter and the adapter, which greatly facilitates the engineering construction and reduces the construction or maintenance of the conventional box optical splitter.
Damage caused by improper piping. 1:4 and 1:8 use one slot, 1:16 occupies 2 slots, and 1:32 occupies 4 slots.
Ø The storage of pigtails is fixed by SC adapter. When the customer does not open it, the pigtails of the upper link are parked here, realizing no jumper connection.
Ø Uplink optical cable: capacity of 24 cores, conventionally accommodates 2 optical cables (you can choose a special design to enter 4-6 cables, special requirements when ordering
need to be explained). Butterfly optical cable outlet: butterfly optical cable is connected to SC butterfly optical fiber pigtail or quick connector to the user end, large 32 (64) cores. cable entry
Mode: indoor up/down, outdoor down.
Ø Optical splitter: suitable for 1:4, 2:4, 1:8, 2:8, 1:16, 2:16, 1:32, 2:32 optical splitters
The size of the 12-core capacity box is W*H*D(mm)=265*340*115mm (length and width include skirt size)
The size of the 16-core capacity box is W*H*D(mm)=265*340*115mm (length and width include skirt size)
The size of the 24-core capacity box is W*H*D(mm)=265*340*115mm (length and width include skirt size)
The inside of the box adopts a flip-up structure, and the area above the flip plate is used for the connection between the external introduction optical cable and the user introduction optical cable.
The area under the flip plate is used for various optical cables, pigtail routing, and end-to-end fusion of external drop cables. It supports the up and down of external drop cables.
Fang incoming line requirements,.
The size of 36 cores is W*H*D(mm)=320*420*125mm (length and width include skirt size).
The inside of the box adopts a flip-up structure, and the area above the flip plate is used for the connection between the external introduction optical cable and the user introduction optical cable.
The area under the flip plate is used for various optical cables, pigtail routing, and end-to-end fusion of external drop cables. It supports the up and down of external drop cables.
Side entry requirements.
The plug-in 32-core size is W*H*D(mm)=320*420*125mm (length and width include skirt size)
A product introduction:
Product Overview: Installed on outdoor walls, poles, etc., it can easily complete the connection and distribution of optical cables, and can meet the placement of optical splitters.
Spectral function.
Product Features :
- Wall-mounted type and pole-hoop type suitable for outdoor walls are available.
- The slotted splitter is placed in the box, and 2 or 4 1 point 8 slotted splitters can be installed.
- It integrates fusion splicing, light splitting and wiring, which can realize direct fusion and connection of optical cables.
- Cables can be fed up and down, which is easy to operate and has a reasonable structure.
- The optical cable is easy to fix and ground, and there is enough wiring space in the box .
- Two characteristics and structure description:
- The box body is made of PC/ABS alloy material, with a service life of more than 20 years .
- The design of the double-layer structure, the upper layer is the optical splitter wiring layer, and the lower layer is the optical fiber fusion layer .
