Welcome to Shanghai huijue network communication equipment Co., Ltd

Server cabinet introduction

The depth, height, load-bearing, etc. of the server cabinet are regulated for the installation of 19″ standard equipment such as servers, UPS, monitors, and non-19″ standard equipment. The heights are 2.0 meters, 1.8 meters, 1.6 meters, 1.4 meters, 1.2 meters, 1 meter and other heights; the common widths are 600 mm and 800 mm; the common depths are 600 mm, 800 mm, 960 mm and 1000 mm. Various manufacturers can also customize according to the needs of customers.

Optional accessories: fixed tray, casters, sliding tray, cable management ring, horizontal bracket, horizontal cable management frame, vertical cable management frame, L bracket, blind plate, etc. The main frame, front and rear doors, left and right side doors can be disassembled quickly.

Fixed tray: used to install all kinds of equipment, with a variety of dimensions and a wide range of applications, including 19″ standard trays, non-standard fixed trays, etc. The basic configuration of fixed trays has a depth of 440mm, 480mm, 580mm, and 620mm And other specifications. The load-bearing capacity of the fixed pallet: 50 kg, 80 kg, 100 kg, 200 kg.

Sliding Tray: Used to install the keyboard and various other equipment, it can be easily pulled out and pushed back; the 19″ standard sliding tray can be used in any 19″ standard cabinet. There are two specifications for the sliding tray depth of the basic configuration: 400 mm and 480 mm. The load-bearing capacity of the sliding pallet is not less than 50 kg.

Cabinet power distribution unit: Optional power socket, suitable for any standard power plug, with 19″ mounting frame, flexible and diverse installation methods.

Specifications: 6 ports, 8 ports, 16 ports, 21 ports and other specifications

Cable management frame: 19″ standard cable management frame, which can be used with any type of standard cabinet. The 12-hole cable management frame works best with 12-port, 24-port, and 48-port distribution frames.

Cable management ring: It is very convenient to install and disassemble, and the number and orientation of the application can be adjusted arbitrarily.

L bracket: The L bracket can be used with the cabinet to install the 19″ standard equipment in the cabinet, especially the 19″ standard equipment with a relatively large total weight, such as rack-mounted servers and so on.

Blind plate: The blind plate is used to cover the vacant position in the 19″ standard cabinet, etc. It has various specifications such as 1U, 2U… and so on. The basic blind plate is 1U, 2U, and 4U.

Mounting nut (square nut): It can be used in any TOPER series cabinet for the installation of all equipment in the cabinet, including the installation of most accessories of the cabinet.

Keyboard bracket: used to install a standard computer keyboard, which can match all specifications of computer keyboards on the market; it can be folded 90 degrees. The keyboard tray must be used with the sliding tray.

Fan tray: Installed on the top of the cabinet, the fan speed can be adjusted according to the ambient temperature and equipment temperature, effectively reducing the noise in the machine room.

Transmission mode: manual, stepless transmission.

Full mesh front door: The front door of the cabinet is all Ø3 round holes, which improves the heat dissipation performance of the cabinet.

Full mesh back door: The back door of the cabinet is all Ø3 round holes, which improves the heat dissipation performance of the cabinet.