Welcome to Shanghai huijue network communication equipment Co., Ltd

The research and development of MPO fiber optic connector

The research and development of MPO fiber optic connectors and the application in practical engineering play an important role and significance. It greatly improves the popularity of optical networks and reduces costs. It is a very important application in optical fiber communication networks, transmission systems and CATV networks.

 

At the same time, the application of MPO fiber jumper high-density wiring in practical engineering has an important role and significance. The use of MPO fiber jumper is a very particular knowledge and skill, and it is also a very important link.

Possible problems with MPO fiber patch cords

 

  1. Guide pin hole damage

 

The main reason is that the insertion direction of the male head is inclined when the connection is made, and the front end of the guide pin of the male head is scratched and scratched. Such damage can directly cause some or all of the channel loss values to increase.

 

Second, the end face is dirty

It is mainly caused by the premature removal of the dust cap before docking or long-term exposure to an unclean environment. Such dirt will directly affect the docking performance of the product, making the effect unstable after docking, and even causing damage to the opposite joint during docking.

 

  1. Parts mechanical damage

 

It is mainly caused by the excessive application of external force during the construction process. This type of damage may not affect the performance in the initial stage, but it will basically fail completely in the short term.

 

  1. Cable Mechanical Damage

 

If it is mainly caused by dragging or unintentional cutting during the construction process, such damage may not affect the performance in the initial stage, but it will basically fail completely in the short term.

In order to avoid the above damage and improve the wiring completion rate and long-term stability, the following points should be paid attention to during the wiring process:

 

  1. Try to avoid opening the dust cap before connecting the optical fiber jumper. Try not to remove the dust cap from the adapter interface that has been connected to the adapter panel but has not been docked. Except for normal mating, do not allow the ground end of the connector to come into contact with or scratch any other objects.

 

  1. If there is foreseeable dirt on the end surface, try to use special cleaning tools or clean paper soaked with absolute ethanol to clean the end surface. Do not use paper towels, cotton wool, ordinary cotton swabs and other items to clean the end surface.

 

  1. When docking the connector, confirm that the connector positioning key direction is backward and the adapter or socket panel is inserted axially. Do not repeatedly insert and pull out without being able to view the end face. When inserting the MPO connector into the adapter, pay attention to the part of the connector boot, and when pulling it out, hold the part of the connector shell.

 

  1. When bending the cable, keep the bending radius equal to or greater than 20 times the outer diameter of the cable. When bundling cables, keep the tightness appropriate, and the cable sheath must not be severely deformed. When perforating the cable and threading the tube, use the method of pushing and pulling. Do not drag or push the cable vigorously to prevent the cable from being broken or broken due to scratches.