Advantages of optical fiber distribution box
1 point 8 optical splitter box | (SMC optical splitter box) graphic and text detailed explanation
1 point 8 optical splitter box | (SMC optical splitter box) graphic and text detailed explanation
Professionally provide China Telecom, China Mobile, China Unicom, Radio and Television Network, China Railcom, China Netcom…
FTTH fiber distribution box, FTTH fiber distribution box, FTTH fiber corridor, FTTH fiber distribution box, FTTH fiber distribution box, SMC fiber distribution box
Product capacity: 8 cores, 12 cores, 24 cores, 36 cores, 48 cores, 72 cores, 96 cores, 144 cores
Outdoor Optical Splitter Box, Indoor Optical Splitter Box, Wall Mounted Optical Splitter Box, Embedded Optical Splitter Box, SMC Optical Splitter Box, Cold Rolled Sheet Optical Splitter Box, PC Alloy Light Splitter box, floor-standing optical splitter box
Wall-mounted optical splitter box, floor-standing optical splitter box, embedded optical splitter box, 1 point 8 optical splitter box, 1 point 16 optical splitter box, 1 point 32 optical splitter box , 1 minute 64 optical splitter box
FTTH optical splitter box, sheet metal optical splitter box, SMC optical splitter box, PC optical splitter box, ABS optical splitter box, 1 point 4 optical splitter box, 1 point 8 optical splitter box box, 1 minute 16 optical splitter box, 1 minute 32 optical splitter box, 1 minute 64 optical splitter box
Uplink fiber optic cable: capacity 16-32 fiber optic cable outlet: butterfly fiber optic cable connected to SC butterfly fiber optic cable pigtail or quick connector to the user end. Cable entry method: indoor up/down, outdoor down.
Fiber splitting (light splitting) box: suitable for direct installation of plug-in adapters.
The plug-in optical splitter box adopts a modular design and has two to four (eight) expansion slots, and the optical splitter can be inserted into the slot. The expansion of the port is realized by flexibly increasing the number of optical splitting pieces, and the optical splitting modules of different capacities are universal and interchangeable. In addition, a splice tray is configured for the connection of the uplink optical cable. The storage of pigtails is fixed with adapters, realizing no jumper connection. The box material is made of high-quality cold-rolled steel or stainless steel. The product is mainly suitable for the corridor splitting point under FTTH access mode. It is suitable for primary or secondary spectroscopy of FTTH, and the advantages of secondary spectroscopy are particularly obvious.
Ø The flexible configuration of optical add and insert chips maximizes initial investment savings for operators.
Ø The optical splitter piece integrates the optical splitter and the adapter, which greatly facilitates the engineering construction and reduces the damage of the conventional box optical splitter due to improper construction or storage. 1:4 and 1:8 use one slot, 1:16 occupies 2 slots, and 1:32 occupies 4 slots.
Ø The storage of pigtails is fixed by SC adapter. When the customer does not open it, the pigtails of the upper link are parked here, realizing no jumper connection.
Ø Uplink optical cable: The capacity is 24 cores, and it can accommodate 2 optical cables in general (special design can be selected to enter 4-6 cables at maximum, and special requirements need to be specified when ordering). Butterfly cable outlet: butterfly cable is connected to SC butterfly cable pigtail or quick connector to the user end, with a maximum of 32 (64) cores. Cable entry method: indoor up/down, outdoor down.
Ø Optical splitter: suitable for 1:4, 2:4, 1:8, 2:8, 1:16, 2:16, 1:32, 2:32 optical splitters
The size of the 12-core capacity box is W*H*D(mm)=265*340*115mm (length and width include skirt size)
The size of the 16-core capacity box is W*H*D(mm)=265*340*115mm (length and width include skirt size)
The size of the 24-core capacity box is W*H*D(mm)=265*340*115mm (length and width include skirt size)
The inside of the box adopts a flip-up structure, and the area above the flip plate is used for the connection between the external introduction optical cable and the user introduction optical cable.
The area below the flip plate is used for various optical cables, pigtail routing, and end-to-end fusion of external drop cables, which supports the upper and lower cable entry requirements of external drop cables.
The size of 36 cores is W*H*D(mm)=320*420*125mm (length and width include skirt size).
The inside of the box adopts a flip-up structure, and the area above the flip plate is used for the connection between the external introduction optical cable and the user introduction optical cable.
The area below the flip plate is used for various optical cables, pigtail routing, and end-to-end fusion of external drop cables, which supports the upper and lower cable entry requirements of external drop cables.
The plug-in 32-core size is W*H*D(mm)=320*420*125mm (length and width include skirt size)
1 point 8 optical splitter box (specification with pictures and texts) Features:
- Wall-mounted type and pole-hoop type suitable for outdoor walls are available.
- There is a chip splitter in the box, and 2 or 4 1-point 8-chip splitters can be installed.
- It integrates fusion splicing, light splitting and wiring, and the configuration is more flexible and free, which can realize direct fusion and connection of optical cables.
- Cables can be fed up and down, easy to operate and reasonable in structure.
- The optical cable is easy to fix and ground, and there is enough wiring space in the box.
- The box is made of plastic material, which has excellent moisture-proof, waterproof, dust-proof, anti-corrosion and anti-aging performance, and the protection level reaches IP54.
- The incoming and outgoing lines of optical cables, pigtails and jumpers are independent and do not interfere with each other.
- The plug-in optical splitter can be flipped for operation, which is convenient and quick for construction and maintenance.
Two characteristics and structure description:
1: The box is made of PC/ABS alloy material, with a service life of more than 20 years.
2: The design of the double-layer structure, the upper layer is the optical splitter wiring layer, and the lower layer is the optical fiber fusion layer.
Three: Main technical parameters (in line with the requirements of YD/T988-2007 communication optical cable transfer box)
1: Working temperature: -40℃~+70℃;
2: Storage temperature: -40℃~+70℃;
3: Working humidity: ≤90% (+30℃);
4: Atmospheric pressure: 62Kpa～106Kpa;
5: Insulation resistance: the insulation resistance between the grounding device and the gold workpiece in the box is not less than 2X104MΩ/500V(DC);
6: Withstand voltage: the withstand voltage between the grounding device and the gold workpiece of the box is not less than 3000V (DC)/1min;
7: Insertion loss: IL≤ (PC type); IL≤ (APC type);
8: Return loss: RL≥40dB (PC type); RL≥50dB (UPC type); RL≥60dB (APC type);
9: Interchangeability: ≤.
10: The ground withstand voltage level is not less than 3000V (DC)/1min without breakdown and arcing.
11: Dimensions: Dimensions: 425*315*110 (mm)
12: Heavy:
1 point 8 optical splitter box | (SMC optical splitter box) Factory price supply: 1) Introduce the optical cable into the box through the “waterproof connector” and strip it, and the stripping length is about meters, and fix it on the “optical cable”. On the “Fixing Device”, reserve 100mm for the reinforcing core in the optical cable, and fix it under the “grounding pressure plate” on the “Fixing Device for Optical Cable” (as shown in Figure 3).
Optical cable stripping and fixing diagram (Figure 3)
2) Introduce the stripped optical cable into the “fiber splice tray” through the optical fiber protective sleeve, and the free disk with excess length is stored in the box and fixed with electrical tape.
3) Splicing the optical fiber covered with the optical fiber protective sleeve to the single-ended pigtail in the splice tray.
4 Inventory diagram of optical fiber fusion (Figure 3)
4) Insert the single-ended pigtail fused with the trunk optical cable to be split into the 1:16 “optical splitter” box panel front input end adapter, the redundant length is coiled on the bottom surface of the “flip plate”, and fixed with wire ties
5) Put one end of the “self-supporting butterfly drop cable” through the “leather cable fixing device”, install the “quick connector” and insert it into the 1:16 “optical splitter” box panel front output adapter. And make a record on the identification paper. The redundant length is coiled around the front of the “flipper” and secured with wire ties. (Figure 4)
6) Manage various optical cables in the box through the wire loop to make the wiring smooth and beautiful.
1 point 8 optical splitter box (the specifications are introduced with pictures and texts) installation method:
- Wall-mounted installation Use an impact drill to drill 3 holes on the wall according to the size shown in the figure below, knock in a Φ*40 plastic expansion pipe, hang the box on the wall according to the punched position, and fix it completely with screws. (Figure 5, Figure 6).
Wall Mounting Diagram (Figure 6)
- Pole installation Use 1 pair of clamps to fix the installation back frame to the communication pole, and then pass 3
Fix the box to the mounting bracket with M5 screws (as shown in Figure 7).
In the construction of various communication networks in my country, the company has a broad market and a strong sales network. With the development of the company, we will better grasp and develop the market, speed up the development of new products, improve technology and after-sales service. We will provide customers with the most advanced communication equipment and services more comprehensively and quickly, and contribute to the development of the national communication industry with newer and better products.
After several years of development, it has developed from a low-end communication product manufacturing industry to a high-tech industry. With domestic and foreign advanced level sheet metal automatic processing CNC equipment, automatic spraying lines, optical communication devices and other production equipment, and a complete set of high-precision testing instruments, it provides reliable quality assurance for products.
