Distribution fiber optic cable fusion

1 point 16SMC optical splitter box, 1 point 16SMC optical splitter box, 1 point 16SMC optical splitter box, 1 point 16SMC optical splitter box, blade 1 point 16SMC optical splitter box, 1 point 16SMC optical splitter box, 1 point 16SMC optical splitter box, 1 point 16SMC optical splitter box, 1 point 16SMC optical splitter 1 point 16SMC optical splitter box, 1 point 8SMC optical splitter box 1 point 8 optical splitter box 16 The picture of the optical splitter box is suitable for the wiring connection between the optical cable and the optical communication equipment. Through the adapter in the wiring box through Shanghai Huijue Network Communication Equipment Co., Ltd., the optical signal is drawn out with the optical jumper to realize the optical wiring function. It is suitable for the protective connection of optical cables and distribution pigtails, and is also suitable for the use of optical fiber termination points in optical fiber access networks. Connector plug-in durability life of 1000 times. The full curvature radius control ensures that the curvature radius of the optical fiber is greater than 30mm at any position. Each fiber is clearly marked to avoid confusion that may be caused by disassembly during maintenance. Flame retardant: meet the requirements of experiment A. Huijue Network Performance Connector attenuation (insertion, interchange, repetition); return loss: APC type 60dB, UPC type 50dB, PC type 40dB; high-voltage protective grounding device: insulation resistance: 1000M/500V (DC). Withstand voltage: 3000V (DC)/1min, 1 minute 16 optical splitter box. 1 point 16 optical splitter box picture is suitable for the wiring connection between optical cable and optical communication equipment. Through the adapter in the wiring box, Huijue Network uses the optical jumper to lead out the optical signal to realize the optical wiring function. It is suitable for the protective connection of optical cables and distribution pigtails, and is also suitable for the use of optical fiber termination points in optical fiber access networks. Connector plug-in durability life of 1000 times. SMC 1 point 8 plug-in optical splitter box outdoor fiber splitter box Hongmai communication fiber splitter box is a new product developed and designed for the needs of different scenarios such as first-level splitting or second-level splitting in FTTH construction. This product is used for the connection between the distribution optical cable and the butterfly-shaped home optical cable through the optical splitter, so as to meet the user’s demand for high-speed bandwidth service opening. It is an important optical access point device in the ODN network.

2. Features
3. Applicable to a variety of usage scenarios: indoor, outdoor, wall-mounted, pole-mounted, new and old buildings.
4. Molded box body, installation back plate design, beautiful and compact shape, convenient and fast installation, convenient for large-scale construction.
5. The splitter module port is designed with a 15° inclination, and the wiring is smooth.
6. The serialized inserts can be combined into building blocks, which is convenient for expansion and saves investment.
7. The leather cable adopts a special card slot design, which can be put into the box with a flexible joint, which is reliable in fixing, simple and efficient in laying.
8. Factory-fabricated pigtails to achieve high-quality and low-cost rapid deployment.

Distribution fiber optic cable fusion

1. For the convenience of welding, the box body can be removed, or the welding plate can be removed separately;
2. Take the splitter module rotating frame up and take out the box, and remove the optical cable threading slider, and place it properly;
3. Strip the optical cable, about the length, wrap a few turns of insulating tape at the stripping part of the optical cable, and then fasten it with a throat hoop;
4. Splicing and wiring the optical cable, coiling according to Figure 4, after the operation is completed, insert the module rotating frame into the hinge rotating shaft;
5. Insert the spliced SC pigtail connector into the input port of the splitter. If it is not opened for the time being, park it in the “parking area”;
6. Conduct the grounding of the fiber optic cable strength core, and lead the ground wire from the entrance of the fiber optic cable to ground;
7. Fix the optical cable threading slider, and re-install the box on the back panel of the wall.
8. Features

※ Applicable to a variety of usage scenarios: indoor, outdoor, wall-mounted, pole-mounted, new and old real estate.

※ Molded box body, installation back plate design, beautiful and compact shape, convenient and fast installation, convenient for large-scale construction.

※The splitter module port is inclined at 15°, and the wiring is smooth.

※ Serialized inserts can be combined into building blocks, which is convenient for expansion and saves investment.

※ The leather cable is designed with a special card slot, which can be put into the box with a flexible joint, which is reliable in fixing, simple and efficient in laying.

※ Factory-made pigtail fiber, to achieve high-quality and low-cost rapid deployment.

Distribution fiber optic cable fusion

1. For the convenience of welding, the box body can be removed, or the welding plate can be removed separately;
2. Take the splitter module rotating frame up and take out the box, and remove the optical cable threading slider, and place it properly;
3. Strip the optical cable, about the length, wrap a few turns of insulating tape at the stripping part of the optical cable, and then fasten it with a throat hoop;
4. Splicing and wiring the optical cable, coiling according to Figure 4, after the operation is completed, insert the module rotating frame into the hinge rotating shaft;
5. Insert the spliced SC pigtail connector into the input port of the splitter. If it is not opened for the time being, park it in the “parking area”;
6. Conduct the grounding of the fiber optic cable strength core, and lead the ground wire from the entrance of the fiber optic cable to ground;
7. Fix the optical cable threading slider, and re-install the box on the back panel of the wall.

A product introduction: ZR-12, 16, 24, 32, 36 core 48 core fiber distribution box, suitable for FTTH network telecommunication network data communication network LAN, etc.

The product is injection-molded by high-quality engineering plastics, which can accommodate and install 36-core fiber optic cables at most.

There are 2 fiber optic cable inlets and 2 fiber optic cable outlets, which can be wall-mounted and pole-mounted. Use under hoop conditions. Two features and structure description: 1: The box is made of PC/ABS composite diameter material, and the service life is more than 20 years. 2: The design of double-layer structure, the upper layer is the wiring layer of the optical splitter,

The lower layer is the optical fiber fusion splicing layer. 3: The optical splitter module adopts a drawer-type modular design,

It has strong interchangeability and versatility.

Three: Main technical parameters (in line with the requirements of YD/T988-2007 communication optical cable transfer box)

1: Working ambient temperature: -40°C~+60°C2:

Ambient humidity::≤95%(+40°C)

3: Atmospheric pressure: 70Kpa~106Kpa4:

Number of fiber optic cables entering: 1X2 (bottom entry) 5: Number of leather fibers entering: 1X2 (bottom entry)

6: Door opening angle: 180°7: Adapter optional SC\FC\LC

8: The ground withstand voltage level is not less than 3000V (DC)/1min without breakdown and arcing. 9: Insulation resistance: ≥2X1000MΩ/500V

The indoor type box is made of electric board material, and the surface is treated by electrostatic spraying.

2. It can provide 12, 24, 48, 72 optical terminal points, and can realize the straight-through and disk storage of optical cables;
3. The connection module can be pulled out of the box for operation, which is simple and convenient;
4. FC and SC adapters can be installed by snap-fit;
5. Ensure that the radius of curvature of the fiber is greater than 40mm when the fiber is in any position;
6. There are reliable optical cable fixing, stripping and grounding protection devices;
7. It can be installed on the wall or on the pole.
8. Main technical indicators:
9. Working environment: The optical fiber distribution box is not suitable for use in the open air. If it needs to be used, protective measures should be taken.
10. Ambient temperature: -40℃~ +60℃
11. Relative humidity: ≤95% (+40℃)
12. Atmospheric pressure: 70kPa～106kPa
13. Working wavelength: 850nm 1310nm 1550nm
14. Optical fiber connector loss (including insertion, interchange, repetition): ≤
15. Return loss of optical fiber connector: PC≥40dB, UPC≥50dB, APC≥60dB
16. Plugging and unplugging life of optical fiber connector: > 1000 times
17. Insulation resistance: >2x104MΩ (test voltage is 500VDC)
18. Dielectric strength: >3000VDC/1min without breakdown and arcing .