Advantages of fiber optic distribution box

Detailed graphic analysis of 16-core fiber distribution box , Optical splitting box, optical fiber splitting box, optical cable splitting box, optical splitting box, optical fiber splitting box, optical fiber splitting box, optical fiber distribution box, optical fiber splicing tray, optical fiber cable management ring, optical fiber splicing box.

Model: 8-pin, 12-pin, 16-pin, 24-pin, 32-pin, 48-pin, 72-pin, 96-pin, 144-pin

Material: cold rolled steel, stainless steel, SMC, ABS

Area of use: Mobile Unicom, China Railway Telecom, FTTH, FTTB, FTTX, FTTP

Specializing in supplying supporting products for telecommunications, mobile, China Unicom, China Railcom, radio and television;

Overview of 16-core fiber splitter box:

This product is used in the terminal access link in the FTTH access system, especially suitable for outdoor wall-mounted or hoop-type conditions. It is mainly installed in corridors, weak current shafts, etc. It integrates fusion splicing, light splitting and wiring, and can realize direct fusion and splicing of optical cables, as well as the installation of the plug-in optical splitter. It is suitable for terminal access at the user end and wiring connection with optical communication equipment. Through the adapter in the wiring box, the optical signal is drawn out with the optical jumper to realize the optical wiring function; it is also suitable for the protection of the optical cable and the wiring pigtail. sexual connection. The optical cable can also be spliced and drawn out with the household optical cable after being opened and coiled in the optical distribution box to realize the straight-through function of the optical cable and meet the needs of traditional transmission network engineering.

Advantages of fiber optic distribution box:

1. For the convenience of welding, the box body can be removed, or the welding plate can be removed separately;
2. Take the splitter module rotating frame up and take out the box, and remove the optical cable threading slider, and place it properly;
3. Strip the optical cable, about the length, wrap a few turns of insulating tape at the stripping part of the optical cable, and then fasten it with a throat hoop;
4. Splicing and wiring the optical cable, coiling according to Figure 4, after the operation is completed, insert the module rotating frame into the hinge rotating shaft;
5. Insert the spliced SC pigtail connector into the input port of the splitter, and park it in the “parking area” if it is not opened temporarily;
6. Conduct the grounding of the fiber optic cable strength core, and lead the ground wire from the entrance of the fiber optic cable to ground;
7. Fix the optical cable threading slider, and re-install the box on the back panel of the wall.

Fiber distribution box features:

※ The splitter module port is designed with an inclination of 15°, and the wiring is smooth.

※ Serialized inserts can be combined into building blocks, which is convenient for expansion and saves investment.

※ The leather cable is designed with a special card slot, which can be put into the box with a flexible joint, which is reliable in fixing, simple and efficient in laying.

※ Factory-made pigtail fiber, to achieve high-quality and low-cost rapid deployment.

※ Molded box body, installation back plate design, beautiful and compact shape, convenient and fast installation, convenient for large-scale construction.

Optical fiber distribution box structure description:

1. The box material is made of SMC material, with a service life of more than 20 years
2. Double-layer structure design, the upper layer is the optical splitter wiring layer, and the lower layer is the optical fiber fusion layer;
3. The optical splitter module adopts a drawer-type modular design, which has strong interchangeability and versatility.

Main technical parameters of optical fiber distribution box (in line with the requirements of YD/T988-2007 communication optical cable transfer box)

1. Working temperature: -40℃～60℃
2. Ambient humidity: ≤95% (40℃)
3. Atmospheric pressure: 70kPa～106kPa
4. The number of optical cables entering: 1 × 2 (cable entry below)
5. Number of leather fibers entering: 8×2 (downward fiber)
6. Box door opening angle: ≥180°
7. Adapter: SC/PC
8. Withstand voltage level of grounding row: ≥3000V(DC)/10mA/1min
9. Insulation resistance: ≥2×104MΩ/500V

Scope of application of fiber distribution box

Area of use: Mobile Unicom, China Railway Telecom, FTTH, FTTB, FTTX, FTTP

The introduction, fixation and stripping protection of optical cables, fusion and protection of optical fibers, storage of pigtails, storage and management of jumpers, fixed connection and cross-connection of optical fibers, etc. Value-added module units such as wavelength division multiplexers.