Plug-in plastic splitter box factory
Plug-in plastic splitter box factory direct sales cold-rolled plate 1 point 8 optical splitter box, cold-rolled plate 1 point 16 optical splitter box, cold-rolled plate 1 point 32 optical splitter box, cold-rolled plate 1 64 points optical splitter box, plastic 1 point 8 optical splitter box, plastic 1 point 16 optical splitter box, plastic 1 point 32 optical splitter box, plastic 1 point 64 optical splitter box, SMC1 point 8 optical splitter box, SMC1 point 16 optical splitter box, SMC1 point 32 optical splitter box, SMC1 point 64 optical splitter box, [China Telecom, China Mobile, China Unicom, the company purchased by the developer do free The LOGO is printed on]
According to the installation method, it can be divided into wall-mounted, pole-mounted, wall-mounted, embedded, inlaid, outdoor, indoor, etc. with waterproof function. Product specifications: 1 point 4, 1 point 8, 1 point 16, 1 point 32, 1 point 64 Product capacity: 12 cores, 24 cores, 36 cores, 48 cores, 72 cores, 94 cores, 14 cores Product material: SMCPC cold Rolled sheet PC alloy iron sheet China Mobile China Unicom China Radio and Television China Telecom quality supplier
There should be no looseness or damage to the optical cable. The protective performance of the box should meet the requirements of IP55 in the GB4208-2008 standard. The combustion performance of all non-metallic material structural parts (including pigtails or jumpers) in the corridor optical fiber distribution box shall be carried out in accordance with the provisions of YDT778-2006. The impact performance of the corridor optical fiber distribution box shall comply with the regulations in YD, and the impact test shall be carried out in accordance with the regulations in YD. The composition material of the corridor optical fiber distribution box should meet the requirements of the content of toxic and harmful substances in the uniform material (EIP-A class) stipulated in SJT11363-2006. The product is equipped with 2 mounting plates (one upper and one lower) and 6 sets of installation fasteners. The outdoor type hanging rod type wall-mounted type should be equipped with accessories hangers accordingly. Carry out the test according to the provisions of the item in YDT988-2007, and then carry out the test of related items after recovering for 1h under the test standard atmospheric conditions.
At the same time, there must be a storage space for redundant optical fibers. 7) The fiber connector parts must be protected. After the optical fiber is spliced with the optical fiber, the joint part must be protected with a fusion splicing protective sleeve. 8) Through the pigtail, the serial number of the optical fiber in the optical cable can be quickly and conveniently scheduled and the routing of the transmission system can be changed. The length of the pigtail must meet the requirements of the fiber jumper operation. 9) The door lock of the optical fiber distribution box must be an anti-theft structure with good anti-destructive ability. All boxes need to be reserved for traditional padlock locks or other backup solutions. ●The box material is made of high-quality SMC material, the appearance is free of painting, and the gloss is good. ●Using a flip-up structure, ●Double-layer structure design, the upper layer is the optical splitter wiring layer, ●The optical splitter module adopts a drawer module design, this product is used in the terminal access cycle in the FTTH access system, It is especially suitable for use in outdoor wall-mounted or pole-mounted conditions. The optical splitter is designed according to the YDT1117-2001 standard.
Each functional compartment has 2 sets of optical cable fixing cable grounding devices. Optical splitter insert box that can hold two 8 or one 16 optical splitter inserts. Optical splitter inlet port optical cable storage device. Leather cable storage and binding device. Reversible optical splitter termination and scheduling device. Features: Modular, no fiber jumper structure, wall-mounted installation. number to achieve port expansion. In addition, the optical fiber fusion splicing disc is equipped for the termination of the uplink optical cable and the connection of the optical cable branch, and the fiber storage adapter is equipped for the storage and fixation of the uplink optical cable. 24-core three-net-in-one corridor box, 36-core three-net-in-one corridor box, 48-core three-net-in-one corridor box, 72-core three-net-in-one corridor box, 96-core three-net-in-one corridor box, 24-core three-net-in-one corridor box One split box, 36-core three-in-one split box, 48-core three-in-one split box, 72-core three-in-one split box, 96-core three-in-one split box, 24-core three-in-one split box A splitter box.
